Each end of the vibrating motor has a fixed eccentric block and an adjustable eccentric block, adjusting the angle between the adjustable eccentric block and the fixed eccentric block can change the excitation force.
At the factory, the angle between the adjustable eccentric block and the fixed eccentric block is 0 degrees, and the excitation force is the rated excitation force F of the vibrating motor, and the excitation force at different angles is:
Special attention should be paid to adjust the excitation force, the vibration motor at both ends of the adjustable eccentric block in the same direction to adjust to the same angle.
The adjustment step of the exciting force
⒈ Remove the protective cover.
⒉ the lateral eccentric block to tighten bolts.
⒊ Both sides of the eccentric block should be rotated in the same direction, so that the axis engraved on the eccentric block on the value of exciting force to the desired value of the excitation force, and check whether the two ends are the same angle.
Related Industry Knowledge
- Micro motor industry in the future
- Characteristics of gear motors
- What are the characteristics of the...
- What is vibration Motor
- Vibration Motor Model Description
- Classification of vibration Motor
- The working principle of vibration ...
- Characteristics of Yzo Series Vibra...
- Vibration Motor
- Analysis on installation adjustment...
- DC motor starting method
- What are the performance requiremen...
- Type of motor
- How to maintain small and medium-si...
- Classification of micro-motors